Home > Knowledge > Content
The Technical Classification of Cross-Shaped Bottom Plastic Pallet
Nov 29, 2017

The technical classification of cross-shaped Bottom plastic pallet


1. Most of the mesh cross-shaped Bottom type plastic pallet can realize the process of the one-piece design.

 

2. The welding type, namely the plastic pallet divided by the two pieces separately injection molding, after using the way of hot melt into one, this kind of product process procedure is more. It is mainly used in the production of flat plastic pallet.

 

3. Splicing type, the difference between this kind of product type and welding is not adopted by the hot melt when product together, and on the two products are reserved card slot or reserved hole on plate, convenient for the two boards together with accessories.

 

4. Cross-shaped Bottom belongs to a single face plastic pallet, commonly used in libraries, logistics or packaging for products are exported to more extensive, most field type plastic tray used in handling equipment can be all around into the function of the fork.


5. The Cross-shaped Bottom type plastic pallets can be stacked and used on the shelves.


plastic pallet1.jpg


Related Industry Knowledge

Related Products